Multi-Strip ADVANCED is a unique, environmentally friendly safe paint remover that is designed to remove up to 15 layers of paint and varnish. A lighter coat will remove 1 to 4 layers quickly while a heavier coat will remove multiple layers over time. It is biodegradable, non-flammable, low odor and contains no Methylene Chloride, NMP or Caustic. It can be brushed, rolled or sprayed on with an airless paint sprayer. Multi-Strip removes most varieties of paints and varnishes which are oil or water-based. Unlike other removers it can remove more difficult coatings such as two part epoxy and urethanes. Multi-Strip ADVANCED works on interior and exterior surfaces.
|VOC g/L:||Less than 50% VOC|
Cancer and Reproductive Harm: www.P65Warnings.ca.gov
|Unit Height:||5.43 in.||Unit Width:||7.05 in.|
|Unit Depth:||7.05 in.||Unit Weight:||5 lbs.|
|Case Height:||5.5 in.||Case Width:||13.44 in.|
|Case Depth:||13.44 in.||Case Weight:||20 lbs.|
What product can be used to remove paint from a fiberglass boat?
Ready Strip Marine will effectively strip marine paints without damaging the gel coat or fiberglass.
What is the coverage for Multi-Strip?
Approximately 50-75 square feet per gallon, depending on coatings being stripped, number of layers, and surface being stripped.
Do Back To Nature Multi-Strip or Ready Strip Plus stripped surfaces need to be neutralized?
No. Surfaces can be cleaned with water or Back To Nature After Wash after coating removal.
Can Multi-Strip be used to strip a fiberglass door?
Yes. Follow label directions for best results.
Will Back To Nature strippers work on concrete?
Yes. Since concrete is porous, additional time or applications may be necessary.
Can I use Back To Nature strippers for outside projects when temperature is 40'or below?
No. Back to Nature strippers are most effective at 60-80'F.
Will Multi-Strip damage glass?
No. Multi-Strip is safe for use on glass.